Maneuver Like a Pro in Tight Spaces Equipped with four 2.5-inch locking swivel casters, this hydraulic power current jack glides effortlessly across any shop floor. Each caster features an independent pedal brake that locks both rotation and direction-perfect for accurate positioning during delicate alignment tasks like dowel pin insertion or torque-sensitive installations. Fingertip Precision Alignment The 360° rotating saddle with multi-directional tilt (up to 15°) lets you fine-tune angles to match bellhousings, axle flanges, or mounting points-no more pry bars or guesswork. Raised side lips cradle power currents, differentials, transfer cases, and engine blocks securely while protecting operator bearings and seals. Built for Safety & Longevity Dual high-strength polyester safety straps with abrasion-resistant sleeves and over-center buckles ensure load retention-even over expansion joints. Constructed from reinforced steel, it safely lifts up to 450 lb (204 kg) from a low 7 in (18 cm) to a max height of 22.83 in (58 cm). Store with the saddle lowered and maintain hydraulic fluid to extend service life. Move & Lock Exactly Where You Need It.
4 swivel casters roll easily in any direction for tight bays and crowded shop floors. 4 independent caster brakes let you lock each corner to prevent drift while you line up dowel pins and bolts. 360° rotating saddle to "clock" the load for fast positioning. Multi-direction saddle tilt (front/back and side-to-side) to match angles and align mounting holes with less effort. Includes safety straps to help secure the load during service. Load capacity: 450 lb (204 kg). Strap total length: 114 cm (98 cm + 15 cm extension). Caster brakes: 4 independent locks. Straps: 2 safety straps (98 cm + 15 cm extension), total length 114 cm. What's in the Box.

1 x hydraulic gauge jack (assembled). 4 x locking swivel casters (pre-installed). 1 x pump handle with rubber grip. 1 x user manual with maintenance guide. For consistent lift action, periodically check hydraulic fluid level and bleed air as needed. Wipe the ram clean after use and store the jack with the saddle fully lowered to help extend seal life.