Heavy Duty Electric Hydraulic Rebar Cutter 3/20-5/8 4-16mm Rebar Cutting 800w
Submitted by admin on Wed, 06/14/2023 - 04:10
New Heavy Duty Electric Hydraulic Rebar Cutter For up to 5/8 16mm Rebar 800W US. Safe and efficient cutting is never just a dream! This 800W electric rebar cutter will provide you with both a safe and efficient cutting experience. It can cut your rebar in about 2.5-3 seconds without sparking, providing you with a good working environment. And its rugged material will last you a long time! High Efficiency: It uses an 800W high-power motor that can cut the steel for you in 2.5-3 seconds, which improves your work efficiency. Wide Cutting Range: It can cut rebar in the size range of 4-16mm (3/20"-5/8") for you, which can meet your various cutting needs. Durable Material: The machine is made of hard cast iron, which has good corrosion resistance and rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results! Oil Jug: We have an oil jug for you to easily change or add hydraulic oil.
It is suitable for construction sites, factory workshops, railroad construction, bridge construction, etc. It can cut rebar, round steel, medium carbon steel, low carbon steel, etc. With a hardness of less than 25. Use: Cutting off Steel Bars. Material: Cast Iron Machine, Cr 12 MoV Blade.
Hydraulic Oil Type: 46# Hydraulic Oil(Not Included). Power Cord Length: 2.5m/ 8.2ft. Cutting Range: 4-16mm (3/20"-5/8"). Product Size: 461311.5cm/ 18.15.14.5in. Package Size: 51.51622.5cm/ 20.286.38.86in.
Net Weight: 8kg/ 17.64lbs. Gross Weight: 13kg/ 28.66lbs.
Please place it horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock. Please do not use it to cut materials that exceed the specified diameter or strength, as this may affect the service life of the machine. Please release the switch immediately after cutting to the end to avoid damage to the machine by keeping the switch pressed. It is normal for the pump body to heat up after being cut off or bent about 50 times continuously, please wait until the pump body cools down to normal temperature before using.
Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine. Please change the hydraulic oil every six months. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Machine Size(L x W x H). 461311.5cm/ 18.15.14.5in. Storage Box Size(L x W x H).
51.51622.5cm/ 20.286.38.86in. Cast Iron Machine, Cr 12 MoV Blade.