Heavy-duty Hydraulic Cylinder Components Rods Eye Ends Threaded Parts Mach Steel
Submitted by admin on Mon, 11/02/2026 - 05:10
HEAVY-DUTY HYDRAULIC CYLINDER COMPONENTS - RODS, EYE ENDS, THREADED PARTS & MACHINED STEEL. Hydraulic cylinder piston rods", "Clevis/Eye end shafts", "Machinist surplus stock", or "Heavy equipment pins and bushings.
PRICE IS FOR ONE SET. Surplus lot of substantial machined metal components that appear to include parts from hydraulic cylinder assemblies.
The assortment includes long polished shafts with eye-shaped mounting ends, large tubular components with threaded openings, heavy machined mounting features, circular inserts and several separate threaded or hex-head pieces. These may be of interest to hydraulic cylinder rebuilders, industrial machinery repair shops, custom hydraulic manufacturers, equipment maintenance businesses and machinists looking for usable surplus components. PARTS AND MEASUREMENTS VISIBLE IN THE PHOTOS Measurements below are taken from the tape-measure and digital-caliper photos.
Long polished shaft / rod with eye end Approximately 32 inches overall length, based on the tape-measure photo. Smooth, polished shaft with a substantial circular eye at one end.
An inner bearing or bushing appears to be fitted into the eye. Several similar polished rods are visible in the lot; individual lengths and diameters may vary. Large tubular component with mounting eye and welded side boss Approximately 30-32 inches overall length, estimated from the tape-measure photo. Large cylindrical body with an eye-style mounting feature at one end.
A welded, threaded side boss is visible near the opposite end. The geometry is consistent with a possible hydraulic cylinder barrel/body, but its exact function is unconfirmed. Silver cylindrical component with a machined end collar and female threads The caliper display reads approximately 2.0005 inches across the outside diameter of the machined end collar. The caliper display reads approximately 1.1245 inches across the female-threaded opening in a separate close-up. Internal threads are clearly visible.
Large, heavy machined mounting/end component A caliper reading of approximately 2.1350 inches is shown across a thick machined mounting/end feature. Another view shows approximately 2.4885 inches across a circular feature beneath the large outer body.
A further view shows approximately 1.7305 inches across the inner opening/insert area of this component. These readings refer to different surfaces shown in the respective close-up photos; they should not be treated as interchangeable dimensions. Threaded opening on a separate heavy component The caliper display reads approximately 0.9545 inches across the opening of a threaded socket.
The threaded interior is visible in the photo. Separate black round-headed piece The caliper display reads approximately 1.1700 inches across the round head/end. The exact function of this piece has not been identified. Separate black hex-head piece The caliper display reads approximately 1.7955 inches across the measured flats/width of the hexagonal head. Thread diameter, thread pitch and overall length are not established.
The photos also show additional cylindrical, circular and machined pieces. Their individual specifications have not been established. POSSIBLE APPLICATIONS The long polished rods, threaded cylindrical bodies and eye-style mounting ends are consistent with components potentially used in hydraulic cylinder repair, rebuilding or custom fabrication. Other possible uses depend on the actual dimensions, materials and component design. These are not represented as a complete, operational or pressure-tested hydraulic cylinder assembly. CONDITION AND SALE TERMS Surplus components offered as pictured. The condition and suitability of each individual part for reuse have not been independently verified. Measurements are provided to help prospective buyers identify the parts.
Buyers should independently verify critical dimensions, thread specifications, material suitability and intended application. Please review all photos carefully. Ideal buyers: hydraulic repair and rebuilding shops, custom cylinder manufacturers, industrial maintenance businesses, machinery rebuilders and experienced machinists.
Additional physical measurements can be taken to help establish compatibility. Part Identification Based on the provided images, these are unassembled hydraulic cylinder kits/components. They are not generic pins or surplus stock; they are complete, manufactured assemblies lacking only the internal seals (o-rings/polyurethane seals) and assembly. Component Breakdown:Cylinder Barrel: Hollow tube with a welded mounting eyelet (clevis) at the base and a welded hydraulic fluid port near the top. Piston Rod: Polished metal shaft featuring a welded rod eye at one end.
Cylinder Gland/Head Cap: Threaded, stepped collar that screws into the barrel. Piston: Machined metal puck that attaches to the internal end of the rod. Fastener: Heavy-duty bolt used to secure the piston to the rod.
Bulk Quantity: A large bin contains multiple identical barrels and rods, indicating wholesale or production surplus. Visible Dimensions:The cylinder barrel measures approximately 35 to 36 inches in overall length. The piston rod measures approximately 31 to 32 inches in length. Listing TemplateTitle:Unassembled Hydraulic Cylinder Kits - 36" Barrel, 32" Rod w/ Welded Eyes - Heavy Equipment / Custom FabricationDescription:Bulk lot of unassembled, heavy-duty hydraulic cylinder components.
These are raw, unsealed kits perfect for hydraulic repair shops, custom equipment fabricators, agricultural mechanics, or heavy machinery refurbishers. Included in each set:Cylinder barrel with welded base eyelet and fluid portPolished piston rod with welded rod eyeThreaded cylinder gland / head capMachined pistonPiston retaining boltNote: Seals/O-rings are not included. Approximate Dimensions:Cylinder Barrel Length: 35-36 inchesPiston Rod Length: 31-32 inchesBore/Rod Diameter: [Insert Exact Caliper Measurements Here]Pin Hole Diameter: [Insert Exact Caliper Measurements Here]Condition:New surplus / unassembled stock. Parts are machined and welded, ready for seals and final assembly.
Search Keywords / Tags:Hydraulic cylinder kit, unassembled hydraulic cylinder, hydraulic ram components, polished piston rod, cylinder barrel, threaded gland cap, rod eye mounting, heavy equipment hydraulics, tractor hydraulics, excavator repair, skid steer cylinder, custom fabrication parts, fluid power components, hydraulic repair parts. Based on the visual design, mounting style, and approximate dimensions (36" barrel, 32" rod), these cylinders are built for medium-to-heavy mobile equipment requiring a stroke length of roughly 24 to 30 inches. Here are the most highly probable hardware cross-matches:Compact Tractor Front-End Loaders (FEL): This is the most likely match. The dimensions strongly align with boom lift cylinders or bucket curl cylinders for mid-sized compact tractors e.
Kubota LA-series loaders, John Deere 300/400/500 series, or Mahindra. Skid Steer Loaders: The heavy pin-eye mounts and robust piston are standard for main boom lift cylinders on skid steers e.
Skid steer cylinders endure high stress, matching the thick barrel construction seen here. Mini / Compact Excavators: These dimensions are consistent with the stick (dipper) cylinders or boom cylinders on 2-ton to 4-ton class mini excavators e. Kubota KX series, Bobcat E-series. Agricultural Implements: Cylinders of this exact style and length are frequently used as wing-fold cylinders for large rotary cutters (batwing mowers), folding planters, or heavy tillage disks. Equipment manufacturers use highly specific pin sizes e.
1", 1.25", 30mm, 40mm. New Surplus Unassembled Hydraulic Cylinder KitsUp for sale are unassembled, heavy-duty hydraulic cylinder kits sourced from surplus manufacturing inventory. These are thick-walled, unsealed kits ideal for custom equipment fabricators, agricultural mechanics, or heavy machinery refurbishers fixing skid steers, compact tractors, or mini excavators.
Included in Each Kit:Cylinder barrel with welded base eyelet and hydraulic fluid port Polished steel piston rod with welded rod eye Threaded cylinder gland / head cap Machined metal piston Piston retaining bolt Note: Internal seals and O-rings are NOT included. You will need to source standard hydraulic seals for final assembly.
Dimensions:Cylinder Barrel Length: 35-36 inches Piston Rod Length: 31-32 inches Barrel Outside Diameter: [Insert Measurement]Rod Diameter: [Insert Measurement]Pin Hole (Eye) Diameter: [Insert Measurement]Retracted Pin-to-Pin Length: [Insert Measurement]Condition: New old stock / surplus. Parts are fully machined, welded, and ready for seals.
May have minor surface scuffs from bulk storage, but shafts are clean and straight. Keywords / Search Tags:Hydraulic cylinder kit, unassembled hydraulic cylinder, hydraulic ram components, polished piston rod, cylinder barrel, threaded gland cap, rod eye mounting, heavy equipment hydraulics, tractor loader cylinder, boom lift cylinder, bucket curl cylinder, excavator repair, skid steer cylinder, custom fabrication parts, fluid power components, wing-fold cylinder. This product consists of heavy-duty hydraulic cylinder components, including rods, eye ends, and threaded parts made of mach steel.
The components are designed to withstand demanding industrial and heavy equipment applications, providing durability and reliability for various machinery and equipment. The absence of a specific brand indicates a focus on quality and performance over commercial branding. Ideal for businesses in need of sturdy and long-lasting hydraulic cylinder components for their heavy equipment and machinery.