Heavy Duty Hydraulic Spring Coil Compressor Jack Compression Strut Rising Handle. Vehicle Heavy Duty Hydraulic Spring Compressor Jack Strut Spring Coil Compressor. This product is suitable for the disassembly and assembly of all cars and strut-type shock absorber springs.

Its generality, operability, simplicity and safety of use have unique advantages. The installation and relaxation of the shock absorber and the spring can be accomplished with a variety of handles. With just one person, shock absorber assembly, demount, and install can be finished within 5-10 minutes. Control spring compression and rising handle.

The upper and lower claws sandwich the spring when the spring is compressed and raised. Control the tension of the upper and lower jaw clamp springs. Designed for adjusting the height of the upper lower claws.
Control handle, both sides of the design are thicker than the middle to prevent falling/li>. Shock absorption spring compressor for tyre repair. Able to remove the spring maximum diameter reach up to 10.2" (260 mm) and maximum height reach up to 17" (430 mm) and such capacity suits most springs. Coil spring compressor should be securely fixed on flat ground before starting to use. When applying compression to the spring, always stand beside the unit. If not in use, clean and store the spring compressor in a safe and dry place. I>Maintain the compressor in good condition. Use genuine parts only to replace or repair damaged parts. Wholesale order, the amount of the. Depends on the size of the order.