You are here
Post Lift Auto Hoist Car Vehicle 1ph 10000lbs Hydraulic 220v/110v 2 Sides Unlock
Post Lift Auto Hoist Car Vehicle 1PH 10000lbs Hydraulic 220V/110V 2 Sides Unlock. This product has two voltage specifications of 110V and 220V. Please leave a note after placing the order to tell us which specification you need.
Lock Release :Dual sides manual release. Country of Manufacture: China Capacity: 10000LBS/4500KG. Thickness of steel for pillar: 5mm. Thickness of steel for arm: 6mm.
Thickness of steel for carriage :6mm. Thickness of steel for basement cover: 3mm. Steel rope diameter: 9.3mm. Steel rope pully diameter: 118mm. Motor : 220V 60HZ 1PH MOTOR or 110V/60HZ, 1PH.
Double Points Safety Lock Release. Relief valve built in power pump to prevent overloading. Up-limit switch to protect cylinders working stroke used in safe length scope.
Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down. Lifting operation by pressing "UP" button on motor. Manual lowering operation by pressing lever.
1 sets truck adapters included. Lifting Capacity: 10,000 lbs. Min pad height: 3-3/4(95mm). Lift height max: 70-1/16(1780mm). Drive-thru width clearance: 99-3/8 (2525mm). Time to full rise: 20-60 sec. Before installing your auto lift, check the following. Lift Location: Always use architect's plans when available. Check layout dimension against floor plan requirements making sure adequate space is available. Requires a 220v, 14.5amp, single phase (or 110V, 18.5amps, single phase) grounded electrical source. There should be room enough to operate the lift in a safe manner and without restrictions. Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc. Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete. A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab. New concrete must be adequately cured for at least 30 days.
DO NOT install auto lift on any asphalt surface or any surface other than concrete. DO NOT install auto lift on expansion seams or on cracked or defective concrete. DO NOT install auto lift on a second/elevated floor without first consulting building architect. DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions. All models MUST be installed on 3,000 PSI reinforced concrete only.
And we are a professional Authorized dealers of Autool, Launch, Autel and XTOOL. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! It now own five stocks in the world:US, AU, DE, HK and shenzhen warehouse. It is now one of the biggest online commercial corporations in China. All messages will be reply within 24hours.
The item "Post Lift Auto Hoist Car Vehicle 1PH 10000lbs Hydraulic 220V/110V 2 Sides Unlock" is in sale since Tuesday, November 10, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines". The seller is "carserviceshop" and is located in SHENZHEN. This item can be shipped to United States.
- Brand: AA4C
- Manufacturer Part Number: AA-2PFP45
- Features: Adjustable
- Vehicle Type: Heavy Duty/Commercial
- Warranty: 1 Year
- Type: 2-Post Lift
- Material: Steel
- Capacity: 10000LBS/4500KG
- Country/Region of Manufacture: CHINA
- Part Number: AM11-3HAM-3BAIR-N
Copyright © 2024, Heavy Duty Hydraulic
Design by Zymphonies